This is a general representation of what we carry in-store, please give us a call if you don't see what you're looking for.

Swan Commercial Hose

SWAN



As a contractor, you have a demanding job. You’re responsible for providing the services and labor necessary to construct a project, as well as the material. You also need just the right equipment to get the job done correctly, including an outstanding water hose.

Swan’s heavy-duty contractor hose can handle tough jobs like yours like a pro. It’s incredibly strong, flexible and—thanks to its 400+ PSI burst strength—excellent at delivering large volumes of water over wide areas at construction and commercial sites.

Our ContractorPLUS® heavy-duty hose is reinforced with polyester mesh to prevent it from bursting or kinking. It’s also wrapped in a tough abrasion-resistant jacket, colored red to stand out for safety reasons.

To make this ultra durable hose even more resilient, we’ve added Swan’s patented Hose Armour® at the female coupling so it won’t kink at the water source, while its built-to-last couplings can withstand being run over by heavy construction equipment, up to 4,000 PSI.

We’ve also created a version of this contractor hose with an extra-large 3/4-inch inside diameter, which helps move up to 20% more water than standard 5/8-inch hoses.

The ContractorPLUS® heavy-duty water hose comes with a limited lifetime warranty, so you can count on the quality and performance of this water hose at your construction sites for years to come.

Features

  • 400+ PSI burst strength
  • Heavy-duty contractor hose
  • Ideal for moving large volumes of water over wide areas on construction and commercial sites
  • Ultra durable, heavy-duty flexible hose
  • Extra reinforcement for burst resistance
  • Abrasion-resistant jacket is colored red for safety
  • Patented Hose Armour® prevents kinking at the water source
  • Lead-free-aluminum couplings are crush-proof up to 4,000 PSI
  • Extra-large 3/4-inch diameter version helps move up to 20% more water than standard 5/8-inch hoses
  • Fits all standard faucets and most water accessories
  • Limited lifetime warranty
  • 5/8-inch inside diameter is available as a 50-ft. contractor hose, a 75-ft. contractor hose and a 100-ft. contractor hose
  • 3/4-inch inside diameter is available as a 50-ft. contractor hose, a 75-ft. contractor hose and a 100-ft. contractor hose
  • Made in the USA with global components

Technical Specs

ID: Available in 5/8-inch and 3/4-inch
PSI: 400+
Duty Rating: Heavy

Weight:

  • 5/8 x 50 - 7.58 lbs
  • 5/8 x 75 - 11.1 lbs
  • 5/8 x 100 - 14.5 lbs
  • 3/4 x 50 - 10.22 lbs
  • 3/4 x 75 - 15.1 lbs
  • 3/4 x 100 - 19.94 lbs

Set Up and Care For Your Hose

How Do I Set Up My Hose?

  • Set up your hose outside in temperatures above 70 degrees Fahrenheit to ensure maximum flexibility.
  • Remove all packaging and ties.
  • Check that the washer is properly seated in the coupling that attaches to the water source.
  • Unwind the hose loosely in a circular motion before attaching it to the water source.
  • Run water through the hose until the water exiting the hose is cool.
  • Leave the hose laid out straight and allow it to heat up during the day.
  • Wind the hose back accordingly.

 

How Do I Care for My Hose?

  • Disconnect your hose from any standard metal faucet/spigot/hose bib and metal hose attachment and then reconnect at least twice per year to maintain a proper seal of the washer.
  • Before reconnecting, loosen any corrosion evident on the hose coupling, standard metal faucet/spigot/hose bib and metal hose attachment caused by weather or environmental elements, which can cause the hose to fuse to the faucet and/or attachment.
  • Always inspect the washer for proper placement and clear any buildup on the washer, coupling or faucet. This will help prevent potential leaks.
  • Never overtighten coupling connections. Normally, tightening the coupling connections by hand is sufficient. Using a wrench to tighten the couplings might stop a leak in the short-term; however, it can damage the washer, compromising it for future connections.
  • Do not pull and stretch the hose to reach a watering location beyond the length of the hose. When the hose starts to pull off the ground, you put excess force on its connections to the water source and any attachment such as a nozzle. This will not only damage your hose, it can also damage the plumbing that feeds the water source, as well as the attachment.
  • Be careful not to drive over your hose. This can damage the hose and drastically reduce its life.
  • If your hose is left in a shady spot, its exterior can be cleaned periodically with a mild soap-and-water solution to reduce the chance of organic growth. How Do I Store My Hose?
  • Drain your hose when you’re not using it. Water left in a hose for extended periods of time can cause bacteria to form.
  • Once the hose is drained, the male and female ends can be connected for storage. Washer replacement is suggested annually or after a prolonged connection.
  • When coiling the hose for storage, try to do so without leaving any kinks in the hose. A hose stored with kinks will most likely kink in these same locations very easily once the hose is put back in use. Prolonged kinks create weak spots in the hose.
  • Store the hose indoors when not in use.
  • Flush your hose with water when put back in use.

 

Warnings

  • Do not run hot water through your hose (unless your hose is rated for hot water).
  • Do not run liquids other than water through your hose as they are only designed for use with water.
  • Do not leave the hose under pressure when not in use. Heat or pressure can damage your hose and cause it to leak or burst.
  • Our hoses are not intended for indoor use. Garden hoses are intended for use in residential and/or commercial water systems that have typical average water pressures up to approximately 100 PSI. Garden hoses should not be used for system pressures based upon burst rating.

 

 

 


We Also Recommend